SHINURBON DEODORIZING INSOLE

A good insole makes a good shoe.

Comfortable Steps Without Foot Odor, SHINURBON Insoles

foot-step

99%+

BACTERIA REDUCTION · Test strain: Pneumococcal pneumonia, Staphylococcus aureus

99%+

ODOR REDUCTION · Test gas: Acetone, Ammonia

4-LAYER

Four different materials with different functions are applied to one sole

MADE IN KOREA

South Korea has made the world better 
SHINURBON

DEOFIT TECHNOLOGY

Diopit is a fabric with odor removal and antibacterial properties.

It refers to fabrics that are developed by ourselves that combine the proprietary odor removal and antibacterial powder DEOCORE with silicone ink to be printed on various fabrics and thereby acquire their function.

With this technology, it can be applied to the insole fabric, allowing the odor of foot odor to be continuously removed from the insole, the inside of the shoes, and even the socks.

Now you don't have to worry about foot odor anymore, as long as you have a pair of insole you can wear anywhere, anytime.

SHINURBON insole, top and bottom
SHINURBON INSOLE

We have packed comfort and convenience into one pair of shoes.

Foot odor that bothers you whether you're wearing them or not. We considered odor control and comfortable walking when designing these shoes.

Continuous odor removal

The DEOFIT functional fabric helps reduce the causes of odors.

Antimicrobial function

Helps inhibit bacterial growth, maintaining a pleasant internal shoe environment.

Reduced foot slipping

Silicone printed patterns reduce slippage and provide a stable fit.

Shock absorption

The first and second cushioning layers absorb and disperse impact during walking.

Resilience and durability

Considering the elasticity and resilience of the sponge containing cork, it was considered for long-term use.

Special pads by location

The pads on the forefoot, arch, and heel, as well as the deep heel cup, support the necessary areas.

4-LAYER SYSTEM

Four key features encapsulated in a 4-story structure

Four different materials have been combined into one sole.

01.

DEOFIT fabric: Eliminates foot odor; antibacterial and prevents foot splitting

The DEOFIT functional fabric absorbs and breaks down odors and has antibacterial properties to maintain a comfortable environment. The silicone printed pattern reduces heel slippage for a stable fit.

02.

Osorlite (Solfoam): Absorption of first impact and memory of foot shape

The special EVA layer absorbs the initial impact and remembers the foot's shape, providing a comfortable fit when you put them on again.

03.

G-10 foam sponge: secondary shock absorption, dispersion, and restoration function

G-10 foam with cork absorbs and disperses secondary impact. Its excellent resilience increases the durability of the insole.

04.

Asfire shock-absorbing EVA + high-strength arch support EVA: Special pads for concentrated shock absorption by location

Specialized pads are applied at areas where the load is concentrated, such as the forefoot, forefoot, and heel, to disperse and reduce impact.

Eliminates foot odor and fights bacteria

Preventing foot slipping

Shock absorption and dispersion

First and second

Memory of foot shape

Comfortable wearing

Contains cork

Naturally-friendly materials

It doesn't get hot and doesn't deform even after wearing for a long time

Durability

CUT TO FIT

Fourth stage of tailoring made specifically for you

Tailor the front section to fit the existing insole easily

The key is to not cut the sides and heel, and to only cut the front of the shoe to match the length of the existing insole.
STEP 01

Overlap of existing insoles

Take the existing insole or insole pad out of the shoes and place them neatly on top of the pad. First, make sure to align the heel position correctly.
STEP 02

Front heel construction line marking

Hold the existing insole in place and use a pen to mark the cutting line along the rounded outline of the front of the shoe.
STEP 03

Only the front part is cut off

Follow the line you marked and cut it slowly with scissors. Do not cut the side and heel areas. Cut the left and right insoles in the same way.
STEP 04

Put it in the shoes and check.

Insert the newly cut sole into the shoe and wear it. If the front of the sole bends or puckers, trim it a little more gradually.

If you look closely, you'll see it.

Confidence Without Foot Odor, Brought to You by SHINURBON.

For product, distribution, and manufacturing inquiries: Inzen Co., Ltd.

How to get there

Inseon Co., Ltd. · Shin Ebon

Customer Service Center

30, Gyeojae-ro 87-gil, Yeonje-gu, Busan 205, Commercial Unit 101, Yeonje Green Tower 1

Information for Visitors

If you contact our customer service before your visit, we will guide you accordingly.

MADE IN KOREA

Scroll to Top